Served with a homemade gravy for pork, this is The Roast Recipe I pull out that’s a guaranteed hit, always.

The perfect Pork Roast

This perfect Pork Roast has:

Slow-cooked, tender, juicy, flavour-infused flesh;Super-crispy, bubbly pork crackling all over – no rubbery or chewy patches at all; andServed with it an incredible homemade gravy made with the pan drippings.

It’s made without fussing with blow dryers, boiling hot water, or leaving the pork to air dry in the fridge overnight. It’s simple to make without any special equipment, and works – Every. Single. Time. (But you don’t need to take my word for it. Read the reviews!) Skip to the recipe

My secret tips for perfect Pork Roast with Ultra-Crispy Pork Crackle!

Forget all the fussing other recipes recommend for perfect pork crackling! Just follow these easy steps:

Unrolled boneless pork shoulder (skin-on of course, for the crackling!). Give pork loin a miss – it doesn’t crackle nearly as well!Dry skin – Ensure skin is dryNo scoring – No need to score the skin. In fact, scoring can compromise crispy skin if not done properly!Roast uncovered for the whole time (to keep the skin dry)Long and slow – Roast on a low first to slow-cook the flesh until tender, then high to finish the cracklingKeep the skin surface level by using scrunched up balls of foil. Because level surface = even high-heat distribution = better crackling!

Ever notice how the sides of rolled pork never gets as crispy as the top? That’s because the highest part gets best exposure to heat. So for perfect crispy crackle all over, LEVEL THE PORK using balls of foil!

Best pork for crackling roast pork is boneless pork shoulder

The best pork for roasting and crispy crackle is:

boneless pork shoulder;freshly cut by butcher rather than purchased vac packed from the grocery store (usually rolled and tied or netted);has dry flat skin; andno need to score the skin. But if it’s already scored, it’s fine.

But don’t worry! If your pork is rolled/netted or pre-scored, this recipe still works perfectly. It is just that the crackle can’t come out quite as perfect as pictured…. but still better than any other method you’ll try! In a section further down below, I explain at length why pork shoulder is the best cut for pork roast. But in summary, this is the cut of pork with flesh that can sustain the 3 hour cook time required to get a really good crackling. The meat becomes tender and juicy because it’s a slow cooking cut of meat. Whereas on the other hand, a leaner cut like loin or leg will dry out before the crackling becomes crispy. As for scoring (ie cutting diamond shapes in the skin) – it isn’t necessary for great crackling, as evidenced by all the photos and the recipe video. In fact, scoring poses a risk to crispy crackling because if you (or the apprentice butcher at the supermarket) accidentally cut through to the flesh, the juices will bubble up onto the skin as it cooks, wetting it, and you’ll end up with rubbery rather than crispy skin in that area. See this Chinese Crispy Pork Belly recipe. Hands down the best method for crispy pork belly. Full stop!

What you need to make roast pork

Here’s what you need to roast the pork:

Fennel – For flavouring the flesh. Fennel and pork are great friends, and it is quite simply the best rub for pork, in my opinion!Salt and pepper – Most of the salt goes on the skin. You need a LOT of salt on the skin. In fact, salt is what helps the skin go bubbly-crispy rather than hardening into an impenetrable hard, flat sheet of skin;Oil – To make the seasonings adhere to the flesh and skin, as well as being a heat conductor;Garlic and onion – The pork sits on top of these as it roasts. They serve 3 purposes:Flavour the flesh of the pork even more;Keeps the base of the pork elevated out of the pan juices so it cooks evenly (meat submerged in liquid cooks faster than exposed meat); andAdds incredible flavour into the pan juices to make an epic gravy for the pork roast!Wine (else alcoholic or non-alcoholic apple cider, or water as a last resort) – This is used in the roasting pan and serves 3 purposes:The liquid keeps the pan juices from burning during the long roasting time (ie. the meat juices and fat that drips from the pork). If the roasting pan juices burn, this will turn your gravy bitter. Nobody wants bitter gravy with their pork!Creates a steamy environment for the flesh so it doesn’t dry out during the slow roast. It means we don’t need to cover the pork (which discourages crispy skin); andCreates some moisture in the oven which keeps the pork skin supple enough during the low temperature, slow roasting phase to allow the bubbles to form inside the skin before hardening into a crispy crackle during the final blast of high heat to form the crackling. Without some form of liquid in the roasting pan, the skin comes out like a hard, flat sheet of skin that while crispy, has very few bubbles and is tougher;Flour – To thicken the gravy; andChicken stock/broth – The liquid for the gravy. We also use the pan juices which is loaded with pork flavour. I prefer chicken to beef stock because it has a more mild flavour, so we can really let the pork flavour from the roasting pan juices shine through.

How to make Pork Shoulder Roast

Making a pork shoulder roast with perfect, bubbly crackling from end to end is very straightforward if you ensure you follow all the steps. Do not try to speed things up by increasing the temperature, and do not skimp on salt. Just follow the recipe as written! (Pretty please 😂)

1. Prepare Pork for Roasting

These steps are depicted in the step photos above:

2. Level the pork (secret to evenly crispy crackle!!)

After 1 1/2 hours in the oven, the skin surface that might’ve been flat going into the oven is likely to be a bit wonky. This happens naturally because pork shoulder is a sinewy, tough cut of meat, so it buckles as it slow roasts. At this stage, we need to use scrunched up balls of foil to prop up the pork in parts so the pork skin is as level as possible. This is because perfect pork crackle from edge to edge requires an even distribution of heat on the pork skin. If you don’t do this? The lower parts of the skin will take much longer to become crispy, and sometimes it doesn’t at all. The extent to which you will need to do this depends on how much your pork buckles. Sometimes, one edge of the pork can twist so it’s almost vertical! Just level out the surface of the pork skin as best you can, and later on we can use patches of foil to protect parts that crisp up faster than others. Once you’ve levelled the pork, return it to the oven for another 1 hour at the low temp – so the total low temp slow roasting time totals 2 1/2 hours.

3. Blast it – and then rest it

Now it’s time to CRANK THE HEAT! Turn up the oven to 250°C/485°F, or as high as your oven will go if it won’t go this high. Blast the pork for 30 minutes, rotating the pan as needed to encourage even crackling. Note: This pork roast is slow roasted, so the flesh is almost fall-apart tender (like with Pulled Pork) but it’s not quite at that point, it can still be carved like traditional pork roasts. Here’s what the pork looks like before and after the hot blast: Oh wait, you can’t see the crackling properly. HERE YOU GO!!

Resting is essential!

Resting is when you let cooked meat sit out of the oven for a while before cutting it. This is imperative to let the juices redistribute evenly throughout the meat, otherwise they will just flow away when you slice the pork and you end up with meat that is drier than it should be. The larger the piece of meat and the longer you cook it, the longer it needs to be rested. In this case, the pork is best rested for 15 – 20 minutes to ensure the meat is super juicy, as it should be! Rest the pork loosely covered with foil to keep it warm. Don’t worry, this will not soften the crackling in the slightest, even if you leave it covered for hours. The crackling is that thick and crispy!! If you do not cover with foil, the meat dries out on the outside during the rest time. I specifically tried it once to check.

Serve with gravy for pork roast!

This roast pork recipe comes with a gravy made using the drippings in the roasting pan which is absolutely loaded with flavour. The gravy is gold! So don’t skip it! And surely it goes without saying… never pour gravy onto crispy crackling! All that effort for epic crackling only to douse it and make it soggy?? Nooooooo!!! Move the crackling to the side, then douse in gravy!!!

Best way to reheat pork crackling

If you’re like me and always over-cater, you’ll have leftovers. The best way to store pork crackling is to separate it from the flesh. Yep, stay with me on this. Reheat the pork in the microwave under cling wrap, in a moist environment. Try using leftover pork for epic Bread Bowl Sandwiches or make Cuban Pork Sandwiches! The crackling is so crispy, it will still be crispy even when cold, straight out out of the fridge. To heat it up, just reheat on a tray in the oven. If you reheat it with the meat in the microwave on the other hand, the surface goes soggy and it’s just not as much fun. And with that, you are now armed with the steps you need to make the ultimate pork roast with guaranteed crispy crackling. This is a recipe I first published several years ago, so many, many people have now tried it. So if you are in any doubt about this method, have a browse of the comments! Ordinarily I would now move straight onto the recipe video and the recipe. But because this is a master recipe and a good piece of pork is not cheap, I am also sharing background information about the method I use. There’s a lot of detail, so it’s strictly for fellow food nerds!!! Or, for those of you who just want to understand the logic so you can be 100% confident this recipe will work. If you just want to get cooking, skip straight to the recipe!

BACKGROUND: Why this Pork Roast recipe works

The objective

All too often, you see pork roasts and rolled pork loins with a bit of bubbly crackling on the top, some crispy but flat, really hard crackling on the sides and disappointing patches of rubbery, chewy skin. I like my Pork Roast with tender juicy flesh and perfect bubbly, crispy pork crackling all over. No rubbery patches at all!

The key factors

These are the key factors that drive how I cook my Pork Roast: Skip straight to the recipe! If you’ve made it this far, get ready for an onslaught of some pretty detailed information! Here’s the background to why I make my pork roast the way I do. 🙂

1. Best pork – unrolled, boneless pork shoulder

Unrolled, boneless pork shoulder cut fresh by your butcher is the best cut of pork for the ultimate pork roast because of the shape and cooking qualities. Here’s why:

The pork (and therefore skin) is relatively flat without the bone = better crackling because heat distributes evenly across the rind surface;Meat is always juicier when cooked with the bone in. BUT we’re using pork shoulder here which is beautifully marbled with fat so you don’t lose juiciness for the sake of crackling;The flesh side can be rubbed with seasonings then cooked on a bed of onion, garlic and white wine to infuse the pork with flavour;The meat is made for slow cooking which not only means tender flesh at the end, but the skin has plenty of time to dry out during the low temperature roasting phase before cranking up the oven at the end to make the crackling bubbly and crispy

It’s best to get a fresh cut, boneless pork shoulder if you can because the skin is smooth and flat. Whereas if you buy a rolled pork shoulder which you then unroll, there will often be wrinkles. See below for comparison. This recipe will work fine with rolled pork (ie trussed with string or netted) and Pork Neck, aka Scotch Fillet Roast (Collar Butt for those in the States) but because they are shaped like a log, this usually results in  good crackle on the very top but just ok-to-mediocre crackle on the sides. Do not use this recipe for Pork Loin or Pork Tenderloin, they will dry out. For a pork belly roast, see here. Skip straight to the recipe!

2. No need to score the skin. But if it’s already scored, it’s fine.

You do not need to score for crispy, bubbly crackling. The crackling of this recipe is based around that very fact! 🙂 Scoring helps because with scored skin, the fat under the skin bubbles up while baking. But if you score the skin and accidentally cut through to the meat, the juices will bubble up while roasting and will cause patches of rubbery skin. Why run the risk, when it’s not required? PRO TIP: All too often, grocery store pork is cut by inexperienced butchers so the scoring is done poorly. This is often the cause for crackling that ends up with rubbery patches.

3. Dry skin = superior crackling

This isn’t a ground breaking stuff here, it’s pretty common knowledge. But the problem is, pork shoulder bought from supermarkets usually come vacuum-packed, which soaks the skin in juices. So if your pork was vac-packed, the best way to ensure really dry skin is to pat it dry with paper towels then leave it uncovered in the fridge overnight, or at least 3 hours. The dry skin test: Run your fingers across the surface. Does it glide smoothly? Great, it’s dry. Is it tacky like when you touch your own skin on a hot, humid day? It’s still wet – keep dabbing/drying! Skip straight to the recipe!

4. Infuse flesh with flavour and keep it moist. 

This pork roast is slow-cooked so the fat marbled in the pork roast melts and the tough connective tissues become beautifully tender. I rub the flesh with salt, pepper and fennel (because pork loves fennel!) then place it on a bed of garlic and onion in the roasting pan which serves 3 purposes: I also add a liquid into the pan which keeps the flesh extra moist. My first choice is white wine, followed by dry apple cider. For non-alcoholic options, apple juice, non-alcoholic apple cider, chicken and vegetable broth are all things I’ve used in the past that I’ve liked.

5. Roast uncovered for the whole time

If you cover it, it creates a steamy environment which pork crackling does not like!! Roasted uncovered, the skin isn’t subjected to the moisture from steaming so it gets a kick start for the crisping and drying out of any residual moisture. This is another factor that helps guarantee crispy pork crackling!

6. Low heat then high heat

Juicy, slow cooked meat requires long, slow cooking at a lower temperature, whereas developing crispy crackling requires very high heat. So we start this pork on a lower temperature for 2.5 hours to cook and break down the tough meat to make it beautifully juicy. This is less time than other recipes you may see because it’s a boneless pork shoulder. This is what the pork looks like partway through roasting, before crisping up the crackling: Skip straight to the recipe!

7. Foil balls to level the skin to guarantee crispy crackling

During the slow roast phase, the pork shoulder will look a bit warped. That’s natural – it’s a dense cut with lots of connective tissue that tightens as it cooks, and that’s what happens when it’s roasted without being tied with string to keep shape. And that is why shoulder is usually sold rolled and tied/netted! Now remember: Flat skin = even heat distribution = best pork crackling So at this stage, LEVEL THE SKIN before blasting with high heat. Pull out giant flappy bits of meat to the side and use balls of foil to level out the surface of the skin as much as you can before we blast it with heat to make it puff and bubble. Here’s an example of how I did my pork – the photo on the left shows how low the front side is, then on the right, it is more levelled out overall after propping it up with a ball of foil.

8. Crank up the heat

At the end of the low temp slow roasting time, the pork flesh has slow cooked and broken down so its nice and juicy. But the skin is still rubbery though you will see the start of a few bubbly bits, as pictured above. So now it’s time to crank up that heat to make the skin bubble up all over and make it ULTRA CRISPY like THIS: There’s not even a speck of rubbery skin on that pork. Most of it has bubbled up beautifully and the small parts that haven’t are still ridiculously crispy. And the flesh is so tender! And with that, I am done! Everything I have learned in pursuit of the best pork roast, all written up in one (very big!) post, to share with the world! Soooo … what’s on the menu for supper this weekend?? Just the usual Spag Bol … or a crazy-juicy Pork Roast with Crispy Pork Crackling…..? 😉 – Nagi x

Watch how to make it

Juicy meat assurance! I’ve seen some comments on social media that the meat looks dry in the video. I can assure you it is most certainly not – read comments below to confirm this! The recipe calls for pork shoulder which is a cut of pork ribboned with fat that becomes tender and juicy when slow cooked like we do in this recipe. Put it down to poor filming – and the next time I make it, I AM going to film those cut shots again so you can see how juicy the meat is! Originally published April 2018. Updated with new photos, new recipe video and rewritten post. No change to recipe but writing has been tidied up!

BEST OF SUNDAY SUPPER ROASTS

Garlic Herb Butter Roast Chicken – or try this amazing Slow Cooker Roast ChickenBeef Standing Rib Roast (Prime Rib) with Red Wine SauceClassic Roast Lamb Leg with GravySlow Roasted Roast Lamb Shoulder and Slow Roasted Lamb Leg 

Life of Dozer

Now that’s true love……

Pork Roast with Crispy Crackling - 58Pork Roast with Crispy Crackling - 79Pork Roast with Crispy Crackling - 85Pork Roast with Crispy Crackling - 47Pork Roast with Crispy Crackling - 3Pork Roast with Crispy Crackling - 31Pork Roast with Crispy Crackling - 84Pork Roast with Crispy Crackling - 4Pork Roast with Crispy Crackling - 62Pork Roast with Crispy Crackling - 18Pork Roast with Crispy Crackling - 62Pork Roast with Crispy Crackling - 65Pork Roast with Crispy Crackling - 97Pork Roast with Crispy Crackling - 51Pork Roast with Crispy Crackling - 67Pork Roast with Crispy Crackling - 45Pork Roast with Crispy Crackling - 1Pork Roast with Crispy Crackling - 47Pork Roast with Crispy Crackling - 94Pork Roast with Crispy Crackling - 59Pork Roast with Crispy Crackling - 84Pork Roast with Crispy Crackling - 86